Filter
Top Products
31
VQT0T50
Record ing
First, format the SD card if one which has been used on another device is going to be used
for the first time on this unit. (P65) When the SD card is formatted, all of the recorded data
(files) is deleted. Once the data is deleted, it cannot be restored. Copy valuable data onto a
PC or other device before proceeding with the formatting. When copying images recorded
using this unit to a PC, you must use MotionSD STUDIO. (P73)
This unit is compatible with wide-screen TVs (16:9) and set to wide mode at the time of
purchase. To watch images on normal TVs (4:3), change the wide mode setting before
recording (P40) or when playing back the images on the TV screen (P71).
∫ Basic camera holding
≥ Open the LCD monitor.
Recording cannot start when the LCD monitor
is closed. However, even if the LCD monitor is
closed during recording, the power does not
turn off until recording is ended.
≥ The angle of the LCD monitor can be adjusted
to suit what you want to record.
≥ We recommend attaching the hand strap 4
(supplied) to prevent the camera from dropping.
≥ Do not cover the White balance sensor 3 with
your fingers, etc.
≥ Do not cover the lens, the front of the flash 1 or the built-in stereo microphone 2
with your fingers.
Check before recording
Depending on the TV connected,
the sides of the images (the part
outside the dotted line) being
played may not appear. We
recommend widening the recording
range of the objects you want to
record beforehand.
116:9 screen
24:3 screen
12
3:42 PM
3:42 PM
DEC 15 2005
DEC 15 2005
3:42 PM
3:42 PM
DEC 15 2005
DEC 15 2005
16:9 4:3