Filter
Top Products
55
VQT0T50
To adjust the brightness of the flash
Press the menu button, use the cursor
button to select
[ ADVANCE]>[ FLASH LEVEL],
then set the desired brightness level. (P26)
–[ßj]: If the brightness is too high
([ßj] or [ßAj] indication will appear.)
–[ßd0]: In normal recording
([ß] or [ßA] indication will appear.)
–[ßi]: If the brightness is insufficient
([ßi] or [ßAi] indication will appear.)
MENU
SETUP ENTER
EXIT
FLASH
RED EYE
REC LAMP
ADVANCE
FLASH LEVEL
1/2
O.I.S.
≥ Do not accidentally press or cover the
flash with your fingers when holding the
camera.
≥ Store the flash when it is not being used.
≥ The unit, even when its flash has been
closed, automatically determines if the
flash is necessary by detecting the
ambient brightness. (If it determines that
the flash is necessary, the [ß] indication
flashes yellow.)
≥ When the [ß] ([ßi]/[ßj]) indication or
the [ßA] ([ßAi]/[ßAj]) indication is
displayed, the flash can be lit. If the
indication is flashing or not displayed, the
flash cannot be lit.
≥ The available range of the flash is
approx. 1 m to 2 m (3.3 feet to 6.6 feet) in
a dark place. Pictures will appear dark or
reddish when they are recorded by using
the flash at distances greater than 2 m
(6.6 feet).
≥ When setting the flash to [ßA] and
adjusting the shutter speed or iris/gain at
the same time, the indication [ßA] etc.
may disappear and the flash may not
flash.
≥ Using the flash fixes the shutter speed of
1/750 or faster to 1/500.
≥ The picture may become out of focus in a
dark place. If so, adjust the focus
manually. (P45)
≥ The picture may appear dark if flash is lit
in front of a white background.
≥ Keep the flash stored in locations where
using a flash is prohibited.
VQT0T50_PP_ENG.book 55 ページ ２００５年８月３１日 水曜日 午後２時２５分