Filter
Top Products
Editing Mode
-37-
Editing Mode
Audio Dubbing
You can add music or narration to the recorded
Cassette.
≥If the tape recorded in the [16bit] Mode is
dubbed with the Audio Dubbing function, the
original sound is erased. (If you wish to
preserve the original sound, use the [12bit]
Mode when recording.)
≥Audio Dubbing cannot be performed on a
recording made in LP Mode. (
-20-)
1 Press the [;] Button (69) on the Remote
Controller where you want to add new
sound.
2 Press the [A.DUB] Button (55) on the
Remote Controller.
3 To start Audio Dubbing, press the [;]
Button
(69) on the Remote Controller.
To Cancel Audio Dubbing
Press the [;] Button (69) on the Remote
Controller.
The Camcorder is in the Still Playback Mode
again.
To Play Back the Sound Recorded by 12bit
Audio Dubbing
Set [TAPE PLAYBACK MENU] >> [PLAYBACK]
>> [12bit AUDIO] >> [ST2] or [MIX].
ST1: It plays back only the original sound.
ST2: It plays back only the sound added by Audio
Dubbing.
MIX: It plays back both the original sound and the
sound added by Audio Dubbing
simultaneously.
To Dub Audio While Listening to a
Pre-recorded Sound
When pausing the audio dubbing, set the
[12bit AUDIO] on the [PLAYBACK] Sub-Menu to
[ST2] and you can check the pre-recorded sound.
Use headphones to listen to the pre-recorded
sound while dubbing the audio.
≥For other notes concerning this item, see
-50-.
INDEX INDEX
SELECT
STOP
KL
∫
V
/REW
STILL ADV
T
W
sVOL r
¥REC
MULTI/
P-IN-P
A.DUB
PLAY
PAUSE
FF/
W
STILL ADV
615
;
ED
P.B. ZOOM
(55)
(69)
Copying on an S-VHS (or a VHS)
Cassette
(Dubbing)
After connecting the Camcorder and the VCR
as illustrated, start the following procedures.
1 AV Cable
2 S-Video Cable
≥Be sure to press the [OSD] Button (
-12-) on the
Remote Controller prior to copying so that no
indications are visible. Otherwise, the displayed
tape counter and function indications are also
copied.
Camcorder:
1 Insert the recorded Cassette.
VCR:
2 Insert an unrecorded Cassette with an
erasure prevention tab.
≥If various setups (such as external input, tape
speed, etc.) are required, please refer to the
operating instructions of your VCR.
Camcorder:
3 Press the [1] Button (11) to start playback.
VCR:
4 Start recording.
5 Press the Pause or Stop Button to stop
recording.
Camcorder:
6 Press the [∫] Button (12) to stop playback.
1
2
[VIDEO IN]
[AUDIO IN]
[S-VIDEO IN]
S-VIDEO
OUT
A/V OUT
PHONES
REMOTE/MIC
(PLUG IN POWER)
DV