Before Use
-8-
Quick Guide
1 Attach the Battery to the AC Adaptor and
charge it.
≥Before use, fully charge the Battery.
≥Since the Battery will not be charged when
the DC Cable is connected to the AC
Adaptor, disconnect it from the AC Adaptor.
≥The [CHARGE] Lamp lights up, and charging
starts.
≥When the [CHARGE] Lamp goes off,
charging is completed.
2 Attach the charged Battery to the
Camcorder.
ª Inserting a Cassette
1 Slide the [OPEN/EJECT] Lever 1 toward
the front and pull down to open the
Cassette Compartment Cover.
2 Insert a Cassette.
3 Close the Cassette Holder by pressing the
[PUSH] mark 2.
4 Close the Cassette Compartment Cover.
OPEN /
EJECT
1
PUSH
2
ª Recording on a Tape
1 Set the [OFF/ON] Switch 1 to [ON].
≥The [POWER] Lamp 2 lights up.
2 Set the Mode Dial to Tape Recording Mode.
3 Press the Recording Start/Stop Button.
≥Recording starts.
4 Press the Recording Start/Stop Button
again to pause the recording.
ª Recording a Still Picture (Photoshot)
1 Set the Mode Dial to Tape Recording Mode.
2 Press the [PHOTO SHOT] Button in the
Recording Pause Mode.
ON
OFF
1
2
POWER
PHOTO SHOT
PV-GS33PP_Eng.book 8 ページ 2004年2月26日 木曜日 午後5時29分