Filter
Top Products
Record mode
Recording still pictures onto a card • On-screen display in the card
(Photoshot) (PV-GS85 only) recording mode
i_iHHHHHHHHHHHHHHHHHHHH__HHHHH_iHiHHHiHHHHHHHHHHHHHHHHHHH_iHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH_
• Set to Card Recording Mode.
1 Press the Photoshot button [O]-
©
o
• To record still pictures clearly
• When zooming in on the subject with a
magnification of 4x or higher, it is difficult to
reduce the slight shaking from holding the
Camcorder by hand. We recommend
decreasing the zoom magnification and
approaching the subject when recording.
•When recording still pictures, hold the
Camcorder firmly with your hands and keep
your arms stationary at your side so as not to
shake the Camcorder.
• You can record stable pictures without shaking
by using a tripod.
• For the number of still pictures to be recorded
on a card, refer to -7/-.
• Moving pictures and sound cannot be recorded
onto a card.
•While data is being recorded on a card, do not
operate the mode dial.
•When the access lamp is lit, do not remove the
card.
• Another product may degrade or not play back
data recorded on this Camcorder.
• If you set [PICT.QUALITY] >> [==%],mosaic-
pattern noise may appear on a playback image
depending on the picture content.
3]
4)
1) Still picture size
2) Card indication (-.;_*-)
3) Number of recordable still pictures
(When no picture can be recorded, this
indication will flash in red.)
4) Quality of still pictures
• Select the picture quality for
photoshot images
1 Set [BASIC] >> [PICT.QUALITY] >> select
the desired picture quality.
[==!==]: High picture quality
[_=]: Normal picture quality
• You can also change the picture quality on
[ADVANCED] >> [PICT.QUALITY] in the tape
recording mode.
• Recording with a shutter operation
effect
You can add a shutter operation simulating
sound.
1 Set [ADVANCED] >> [SHTR EFFECT] >>
[ON].
30
LSQT1121