Filter
Top Products
Others
Warning/alarm indications
If any one of the following indications lights up or
flashes, please check the Camcorder.
Confirmatory indications
_: A cassette with the accidental erasure
prevention slider placed in the [SAVE]
position is inserted.
No cassette is inserted.
[--]/_:
The built-in battery is low. -16-
[]: The warning/alarm indication appears when
you record yourself. Turn the LCD monitor
towards the viewfinder and check the
warning/alarm indication.
•_: No card is inserted.
1_29END:
The tape came to the end during recording.
: The video heads are dirty. -65-
Textual indications
[_ DEW DETECT/[_ EJECT TAPE:
Condensation has occurred. Take out the
cassette and wait for a while. It takes some
time until the cassette holder opens, but this
is not a malfunction. -65-
LOW BATTERY:
The battery is low. Recharge it. -14-
NO TAPE :
No tape is inserted. -/9-
TAPE END:
The tape came to the end during recording.
CHECK REC TAB:
You are attempting to record pictures on a
tape with the accidental erasure prevention
slider placed in the [SAVE] position.
You are attempting digital dubbing on a tape
with the accidental erasure prevention slider
placed in the [SAVE] position.
WRONG TAPE FORMAT:
You are attempting to play back a tape
section that has been recorded with a
different TV system. This cassette is
incompatible.
UNPLAYABLE CARD:
You are attempting to play back data not
compatible with this Camcorder.
CLOSE CASSETTE DOOR:
The cassette cover is open. Close the
cassette cover. -19-
COPY PROTECTED:
Images cannot be recorded correctly
because the medium is protected by a copy
guard.
CARD ERROR:
This card is not compatible with this
6O
LSQT1121
Camcorder.
You are attempting to format a failed card.
This message is displayed, when you
attempt to insert an incompatible card to
Card Slot.
NO CARD:
No card is inserted.
CARD FULL:
Card does not have sufficient memory
remaining.
Select Card Playback Mode and delete
unnecessary files.
NO DATA:
There are no recorded files on the card.
FILE LOCKED:
You are attempting to erase protected files.
CARD LOCKED:
The write protection switch on the SD Card
is set to [LOCK].
NEED HEAD CLEANING:
The video heads are dirty. -65-
PUSH THE RESET SWITCH:
An irregularity in the equipment has been
detected. Press the [RESET] button (-64-).
This may solve the problem.
CHANGE MODE TO USE USB:
The USB cable is connected to the
Camcorder in Card Recording Mode.
DISCONNECT USB CABLE:
You are attempting to turn the mode dial in
PC Connection Mode with the USB cable
connected to the Camcorder. You are
attempting to record pictures on a tape/card
with the USB cable connected to the
Camcorder.
CAN NOT USE USB:
You are connecting the USB cable with the
DV cable connected.
CHANGE TO MANUAL MODE:
You are attempting to select the item on the
[SCENE MODE] when the [AUTO/
MANUAL/FOCUS] switch is set to [AUTO].