Filter
Top Products
Edit mode
olf you record (dub) images onto another video
device and then play them back on a wide-
screen TV, the images may be stretched
vertically. In this case, refer to the operating
instructions for the device that you are recording
(dubbing) to or read the operating instructions
for the TV and set to 16:9 (full).
• For more information, refer to the operating
instructions for your TV set and recorder.
•When you do not need functional indications or
date and time indication, respectively set
[SETUP] >> [DISPLAY] >> [OFF] or set [BASIC]
>> [DATE/TIME] >> [OFF] in the Tape Playback
Mode.
(When you connect the Camcorder and a
recorder with the DV cable, these indications
may not appear.)
• When neither image nor sound from
the Camcorder is output to the TV set
• Check that the plugs are inserted as far as they
go.
• Check the [12bit AUDIO] settings. (-.48-)
• Check the connected terminal.
45
LSQT1121
Using the DV Interface Cable for
Recording (Digital Dubbing)
ii _i_i_i _I_I_I_IHHHHHHHH_HHH_IH_I_I_IHHHHHH_IHHHH_I_I_IHHHH_IHI_I_I_IHH_I_I_IHHHHHHHHHH_IHHHHHHHiHHHHHHHHHH_i_i_
By connecting other digital video equipment with
DV terminal and the Camcorder by using the DV
cable PV-DDCg/PV-DDC9-K (optional) O, high-
image-quality dubbing can be done in digital
format.
• Set to Tape Playback Mode.
(Player/recorder)
1 Connect the Camcorder and digital video
equipment with the DV cable.
2 Set [ADVANCED] >> [REC STDBY] >> [YES].
(Recorder)
3 Start playback. (Player)
4 Start recording. (Recorder)
Move the joystick up to select [O11I] icon.
©
5 Move the joystick up to select the [O/11]
icon again to stop recording. (Recorder)
6 Stop playback. (Player)
• To cancel the standby for recording
When the Camcorder is standby for recording,
move the joystick down and select the [11]icon.
• Do not plug or unplug the DV cable during
dubbing, or the dubbing may not be completed
properly.
• If a picture (bilingual video, etc.) containing main
sound and sub sound has been dubbed, select
the desired sound by [SETUP] >> [AUDIO OUT]
on playback.
• Even ifyou use a device equipped with DV
terminals such as IEEE1394, you may not be
able to perform digital dubbing in some cases.
For more information, see the instructions for
equipment connected.