Filter
Top Products
Playback mode
Deleting files recorded on a card
(PV-GS85 only)
The deleted files cannot be restored.
oSet to Card Playback Mode.
1 Move the joystick left or right to select a file
to delete.
• You can select a file in the multi-screen display.
After selecting the file, press the joystick and
display the operation icon.
2 Move the joystick down to select [_ ].
3 Move the joystick up or down in order to
select [DELETE 1 FILE] and then press it.
4 When the confirmation message appears,
select [YES] and press the joystick.
oln order to stop deletion, select [NO].
• To delete all files
1 Move the joystick down to select [_ ].
2 Move the joystick up or down in order to
select [ALL FILES] and then press it.
3 When the confirmation message appears,
select [YES] and press the joystick.
oDo not turn off the power while deleting.
oTo delete files, use the AC adaptor or a
sufficiently charged battery.
oln case of [ALL FILES], the deletion may take
time ifthere are many files on the card.
• If the "CARD FULL" indication appears when
recording, the card is full and no further data
can be recorded. Insert a new card or set the
Camcorder to Card Playback Mode and delete
unnecessary files.
• If files conforming to DCF standard are deleted,
all the data related to the files will be deleted.
• Deleting still picture files recorded on
a card by other equipment
• A still picture file (other than JPEG) that cannot
be played back on the Camcorder may be
deleted.
Note:
To delete multiple files on the SD Card (selected
files) connect to a PC and use the SD Drive
feature.
Formatting a card (PV-GS85only)
Please be aware that if a card isformatted, then
all the data recorded on the card will be erased.
Store important data on a personal computer, etc.
• Set to Card Playback Mode.
1 Set [ADVANCED] >> [FORMAT CARD] >>
[YES].
2 When the confirmation message appears,
select [YES] and press the joystick in order
to format the card.
• In order to stop formatting, select [NO].
• Normally, it is not necessary to format the card.
If a message appears even though you insert
and remove the card several times, format it.
• If the SD Card is formatted on other equipment,
it may take longer to record or you may not be
able to use the SD Card. In this case, format the
SD Card on this unit.
(Do not format it on a PC etc.)
• This unit supports SD Memory Cards formatted
in FAT12 system and FAT16 system based on
SD Memory Card Specifications and SDHC
Memory Cards formatted in FAT32 system.
43
LSQT1121