Filter
Top Products
Menu
Menus related to recording Menus related to playback
• [DATE/TIME]
This switches between date and time indications.
oThe Camcorder automatically records the date
and time the picture was taken on the tape/card.
• [AUDIO REC]
Switches the audio (PCM audio) recording
systems.
[12bit]: Records audio in "12 bit 32 kHz 4 tracks".
(The original sound recorded is preserved
after audio dubbing.)
[16bit]: Records audio in "16 bit 48 kHz 2 tracks".
Audio can be recorded in higher quality.
(The original sound recorded is erased
after audio dubbing.)
oAudio dubbing cannot be performed on this unit.
If you want to edit the sound on a model with an
audio dubbing function, set [12bit] to take
pictures.
• [DISPLAY]
Set to [ON] and the display mode can be switched
to all functions. Set to [OFF] and it can be
switched to minimum display.
• [BEEP SOUND]
Set to [ON] and confirmation/alarm beeps are
issued as follows.
1 Beep
•When you start recording
•When you turn on the power
•When the unit goes from quick start standby
mode to recording pause
2 Beeps
•When you pause recording
oWhen you turn off the power
•When the unit goes into quick start standby
mode
2 Beeps for 4 times
•When a cassette with its erasure prevention tab
set te [SAVE] is inserted, condensation occurs
(-65-), and at other times. Check the sentence
displayed on the screen. (-6#-)
38
LSQT1121
• [12bit AUDIO]
If you want to edit the sound on a model with an
audio dubbing function, set [12bit] te take
pictures.
You can switch the sound (PCM Audio) when
playing back a tape with sound recorded in
[12bit].
[ST1]: It only plays back the original sound
recorded.
[ST2]: It only plays back the sound on the tape
added with audio dubbing.
[MIX]: It simultaneously plays back both [ST1]
and [ST2] sounds.
Audio dubbing cannot be performed on this unit.
When playing back a tape recorded on this unit,
yeu will net be able te hear the sound if [ST2] is
set. Set [ST1].
• [AUDIO OUT]
This switches the sound to be played back.
[STEREO]: Stereo sound (main sound and sub
sound)
[L]: Left channel sound (main sound)
[R]: Right channel sound (sub sound)
Other menus
• [INITIAL SET]
When there is a menu that cannot be selected
depending on a combination of functions, set to
[YES] for changing the menu settings back to the
initial shipping condition.
(Language setting cannot be back to the initial
shipping condition.)
• [DEMO MODE]
If you set to [DEM© MODE] >> [ON] without
inserting a cassette and a card, the Camcorder is
automatically set to the demonstration mode for
introducing its functions. If any button is pressed
or operated, the demonstration mode is canceled.
If no operations take place for approx.
10 minutes, the demonstration mode
automatically starts. To terminate the
demonstration mode, insert a cassette or a card,
or set to [DEMO MODE] >> [OFF]. For normal
use, set this function to [OFF].