Filter
Top Products
Record mode
Manual focus adjustment
If auto focusing is difficult due to the conditions,
then manual focusing is available.
oSet to Tape/Card Recording Mode.
1 Set the [AUTO/MANUAL/FOCUS] switch to
[MANUAL].
MANUAL
AUTO• ,, _ FOCUS =
2 Set the [AUTO/MANUAL!FOCUS] switch to
[FOCUS].
•The [_] indication and the manual focus [MF]
indication appears.
3 Move the joystick left or right in order to
adjust the focus.
•When focused with a wide angle, the subject
may not be in focus when zoomed in. First,
zoom in on the subject, and then focus on it.
• To restore to the automatic
adjustment
Set the [AUTO/MANUAL/FOCUS] switch to
[AUTO] or [FOCUS].
Manual shutter speed/aperture
adjustment
_I_IH_j_j_HHHH_{_jIHHHHHHHH_jIHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH_
Shutter Speed
Adjust it when recording fast-moving subjects.
Aperture
Adjust it when the screen is too bright or too dark.
• Set to Tape/Card Recording Mode.
1 Set the [AUTO/MANUAL!FOCUS] switch to
[MANUAL].
MANUAL
AUTO. • --,FOCUS
2 Move the joystick left or right to select
aperture icon [1"_] or shutter speed icon
[s'_].
3 Move the joystick left or right in order to
adjust the shutter speed or aperture.
1,1 i2,l
_'l/1OOO 1160
_*F2.O
0de
1) Shutter speed
2) (Aperture) Iris/gain value
To restore to automatic adjustment
Set the [AUTO/MANUAL/FOCUS] switch to
[AUTO].
Manual shutter speed adjustment
• Avoid recording under fluorescent light, mercury
light or sodium light because the color and
brightness of the playback image may change.
• If you increase the shutter speed manually, the
sensitivity lowers and accordingly the gain value
increases automatically, which may increase
the noise on the screen.
eYou may see vertical lines of light in the
playback image of a brightly shining subject or
highly reflective subject, but this is not a
malfunction.
38
LSQT1121