Filter
Top Products
Troubleshooting
Others
105
LSQT1052
Problem Check points
Auto focus function does
not work.
≥ Is manual focus mode selected?
# Set the AUTO/MANUAL/FOCUS switch to AUTO.
≥ Are you trying to record a scene which is hard to bring into
focus in auto focus mode?
# There are some recording subjects and surroundings for
which the auto focus does not operate correctly. (l 112) If
so, use the manual focus mode to adjust the focus. (l 55)
≥ Is the Night view function set?
# When the Night view function is working, focusing shifts into
the manual mode.
Sound is not played back
from the built-in speaker
of this unit.
≥ Is the volume too low?
# During playback, move the volume lever to display the
volume indication and adjust it. (l 60)
Although this unit is
correctly connected to a
TV, playback images
cannot be seen.
≥ Have you selected video input on the TV?
# Please read the operating instructions of your TV and select
the channel that matches the input used for the connection.
Scenes cannot be deleted
or edited.
≥ Is the DVD-RAM or the DVD-RW (VR format) write-
protected?
# Release the protection. (l 85)
If the disc or the contents on the disc have been protected on
another device, release the protection on the same device.
≥ It may not be possible to delete scenes that have been
divided.
# Combine the divided scenes, and then delete them. (l 67)
≥ Scenes displayed as thumbnails in shades of blue and
white may not be deleted. If the scenes are unnecessary,
format the disc or card to erase the data. (l 81, 82) Please
be aware that if a disc or card is formatted then all the data
recorded on the disc or card will be erased.
≥ Is the file on the SD card locked?
# Locked files cannot be deleted. Release the lock setting.
(l 79)
≥ If the SD card’s write protect switch is set to LOCK, then
deletion is disabled. (l 16)
LSQT1052(ENG).book 105 ページ ２００５年１２月２１日 水曜日 午後６時５０分