Panasonic VDR-D150GN Camcorder User Manual


 
Disc and card management
Formatting discs and cards
81
LSQT1052
Disc and card management
(RAM) (-RW‹VR›) (-RW‹V›)
Please be aware that if a disc is formatted, then all the data recorded on the disc will be erased.
¬Rotate the mode dial to select .
1 Press the MENU button, then select [ SETUP] #
[FORMATDISC] # [YES] and press the joystick.
When formatting a DVD-RAM, skip to step 3.
2 (When formatting a DVD-RW only)
Select format type (l 14), then press the joystick.
3 When the confirmation message appears, select [YES], then press the
joystick.
When formatting is complete, press the MENU button to exit the message screen.
During formatting, do not turn this unit off.
When you format the disc, use a battery with
sufficient battery power or the AC adaptor.
In the case of a double sided disc, format each side.
It may not be possible to format a disc with many
scratches or dirt. Such discs cannot be used.
Use this unit to format discs. This unit may not
recognize some discs that have been formatted
using a computer or a device other than this unit.
Formatting discs and cards
Formatting discs
This is for initializing discs.
LSQT1052(ENG).book 81 ページ 2005年12月21日 水曜日 午後6時50分