Panasonic VDR-D150GN Camcorder User Manual


 
Recording
Recording still pictures
41
LSQT1052
Recording still pictures
(SD)
Record the still picture on an SD card.
1 Remove the lens cap, then turn the unit on.
If the unit is turned on with the lens cap fitted, the automatic white balance adjustment may not
function properly.
2 Rotate the mode dial to select .
3 Press the PHOTO SHOT button.
The unit automatically focuses on the subject at the centre of screen
(when auto focus is selected).
The size of pictures: 640k480 pixels
For information about the number of recordable still
pictures on an SD card (l 115)
The sound cannot be recorded.
If the write protection switch on the SD card is set to
LOCK, it cannot be used for recording.
If set [PICT. QUALITY] # [ ], mosaic-pattern
noise may appear on a playback image depending
on the picture content.
While the card access lamp is lit, do not perform the
following, as doing so may damage the SD card or
the data on the card.
Turn the unit off.
Insert or remove the SD card.
Operate the mode dial.
Another product may degrade or not play back still
pictures recorded on this unit.
To record still pictures clearly
When zooming in on the subject with a magnification of 4k or higher, it is difficult to reduce the
slight shaking from holding this unit by hand. We recommend decreasing the zoom magnification
and approaching the subject when recording.
You can record stable pictures without shaking by using a tripod.
LSQT1052(ENG).book 41 ページ 2005年12月21日 水曜日 午後6時50分