Indications
Others
99
LSQT1052
Messages
CANNOT RECORD. Data writing to the disc or card has failed.
NO DATA. There are no images recorded on the disc or card.
INCOMPATIBLE DISC. You inserted an incompatible disc (copy-protected discs, etc.).
PLEASE CHECK THE
DISC.
You inserted a disc that cannot be read on this unit (a disc
recorded in NTSC video format etc.).
FOR BEST
PERFORMANCE
PANASONIC DISC IS
RECOMMENDED.
If this message appears when a disc is inserted, the disc may
be unrecordable. It is recommended that you use Panasonic
discs, since their compatibility with this unit has been confirmed.
Refer to the Panasonic web site for information about disc
compatibility etc.
http://panasonic.co.jp/pavc/global/cs/e_cam
(This website is in English only.)
CANNOT RECORD.
(THIS DISC IS FINALIZED)
A finalized DVD-RW (Video format) or DVD-R has been
inserted. After finalizing, the discs become play-only and cannot
record. If you un-finalize a DVD-RW (Video format), it can be
used for recording. (l 84)
CANNOT RECORD. DISC
IS FULL.
The disc is full or the number of scenes has reached the
maximum limit so no further data can be recorded. Delete
unnecessary scenes (l 64) or insert a new disc.
CANNOT RECORD. THE
NUMBER OF SCENES HAS
EXCEEDED THE MAXIMUM
LIMIT.
INTERNAL TEMPERATURE
TOO HIGH. PLEASE TURN
UNIT OFF AND WAIT A
WHILE.
The temperature of the unit is high so it cannot be operated.
Turn off the power, wait until the unit cools and then turn on the
power again.
CANNOT UN-FINALIZE
THIS DISC.
DVD-R cannot be un-finalized.
DVD-RW (VR format) cannot be un-finalized. DVD-RW (VR
format) after finalization can be recorded and edited in the same
way as DVD-RW (VR format) before finalization.
LSQT1052(ENG).book 99 ページ 2005年12月21日 水曜日 午後6時50分