Filter
Top Products
Editing
Editing still pictures
78
LSQT1052
¬Rotate the mode dial to select .
1 Press the MENU button, then select [ DELETE] #
[ SELECT] or [ ALL] and press the joystick.
≥ When [ALL] is selected, all files on the SD card except the locked files
will be erased. Proceed to step 4.
2 (Only when [SELECT] is selected in step 1)
Select the file to be deleted, then press the joystick.
The selected file is encircled by a yellow frame.
≥ When the joystick is pressed again, the selected file will be cancelled.
≥ Up to 8 files displayed on a page can be set in succession.
3 (Only when [SELECT] is selected in step 1)
Press the button.
4 When the confirmation message appears, select [YES], then press the
joystick.
(Only when [SELECT] is selected in step 1)
To continue deleting other files
Repeat steps 2-4.
To complete editing
Press the MENU button.
∫ Deleting still picture files recorded on an SD card by other products
A still picture file (other than JPEG) that cannot be played back on this unit may be erased.
≥ In case of [ALL], the deletion may take time if there
are many files on the SD card.
≥ Do not turn off this unit while deleting.
≥ When you delete files, use a battery with sufficient
battery power or use the AC adaptor.
≥ Do not remove the SD card while deleting.
≥ If files conforming to DCF standard are deleted, all
the data related to the files will be deleted.
Deleting multiple files from the thumbnail display
LSQT1052(ENG).book 78 ページ ２００５年１２月２１日 水曜日 午後６時５０分