Filter
Top Products
Recording
Manual recording functions
55
LSQT1052
(RAM) (-RW‹VR›) (-RW‹V›) (-R) (SD)
If auto focusing is difficult due to the conditions, then manual focusing is available.
¬Rotate the mode dial to select or .
1 Set the AUTO/MANUAL/FOCUS
switch to MANUAL.
2 Move the switch down and set it to
FOCUS position.
The manual focus indication [1MF] is displayed.
3 Move the joystick left or right to bring the subject
into focus.
≥ When focused with a wide angle, the subject may not be in focus when
zoomed in. First, zoom in on the subject, and then focus on it.
To restore to the automatic adjustment
Press the AUTO/MANUAL/FOCUS switch down again to the FOCUS position.
≥ You can also restore the auto focusing by setting the AUTO/MANUAL/FOCUS switch to AUTO.
Manual focus adjustment
MNL
MNL
LSQT1052(ENG).book 55 ページ ２００５年１２月２１日 水曜日 午後６時５０分