Filter
Top Products
49
LSQT1146
Recording
Press the MENU button, then select
[ADVANCED] # [ZOOM MIC] # [ON]
and press the joystick.
(RAM) (-RW‹VR›) (-RW‹V›) (-R) (SD)
You can record yourself while viewing the LCD
monitor. You can record persons in front of the
unit while showing them the image.
¬Rotate the mode dial to select or
.
Rotate the LCD monitor towards the
lens side.
The image is horizontally flipped as if you see a
mirror image. (However the image recorded is
the same as a normal recording.)
≥ Extend the viewfinder to see the picture while
recording.
≥ When the recording aspect is 16:9, the image
displayed on the viewfinder screen is
squeezed horizontally, but this is normal and
not a sign of any malfunction.
≥ When the LCD monitor is rotated towards the
lens side, the icon will not be displayed even if
you press the joystick.
≥ Only some indications will appear on the
screen. When [°] appears, return the
direction of the LCD monitor to normal position
and check the warning/alarm indication. (l 96)
(RAM) (-RW‹VR›) (-RW‹V›) (-R) (SD)
Gain up mode works with the video light to
enhance the light’s brightness and brighten the
natural colors in a scene.
¬Rotate the mode dial to select or
.
Press the LIGHT button.
Each time you press the LIGHT button:
1 Video light and gain up mode on:
Brighter than when only the video light is on,
but washed out images will appear.
2 Video light on:
To eliminate washed out images, use this
mode.
3 Video light off
≥ The subject should be within 1.5 m (5 feet) of
the unit.
≥ Using the video light reduces battery time.
≥ Set the video light to off when not in use.
≥ Do not look directly into the light.
Recording yourself
MENU
Recording with the video
light
This built-in video light is for
recording in dark places.
LIGHT
1
2
3
r
LSQT1146.book 49 ページ ２００６年１２月５日 火曜日 午前１０時４０分