Filter
Top Products
82
LSQT1146
With other products
≥ You cannot set paper sizes not supported on
the printer.
8 Select the layout setting on
[PAGE LAYOUT].
≥ You cannot set page layouts not supported on
the printer.
9 Select [PRINT] # [YES] and
press the joystick.
The pictures are printed.
≥ Exit PictBridge by disconnecting the USB cable
after the pictures have been printed.
When you want to stop printing halfway
Move the joystick down.
A confirmation message appears. If [YES] is
selected, the number of prints set is canceled
and the screen returns to step 3. If [NO] is
selected, all the settings are kept and the screen
returns to step 3.
≥ Avoid the following operations during printing.
These operations disable proper printing.
jDisconnecting the USB cable
jRemoving the SD card
jSwitching the mode dial
jTurning off the power
≥ Check the settings for the paper size, quality of
print, etc. on the printer.
≥ The sides of pictures recorded when [ ] is
set may be cut at printing. Check before
printing.
When using a printer with a trimming or
borderless printing function, cancel this
function before printing. (Refer to the operating
instructions of the printer for details.)
≥ You may not be able to print still pictures
recorded with other products.
≥ When the unit is connected directly to the
printer, the DPOF settings cannot be used.
≥ Connect the printer directly to this unit. Do not
use a USB hub.
[A4]: A4 size
[STANDARD]: Layout specific to the printer
[]: No frame print
[]: Frame print
0.2
LSQT1146.book 82 ページ ２００６年１２月５日 火曜日 午前１０時４０分