Filter
Top Products
81
LSQT1146
With other products
To stop recording (dubbing)
Stop recording on the connected device.
Then stop playback on this unit.
With a printer (PictBridge)
(SD)
To print pictures by directly connecting this unit to
the printer, use a printer compatible with
PictBridge. (Read the operating instructions for
the printer.)
≥ Use the AC adaptor to free you from worrying
about the battery running down.
¬Insert an SD card with recorded
images in the unit, then turn on the
unit.
1 Connect this unit and a printer.
A USB cable (supplied)
≥ Insert the plugs as far as they will go.
≥ Do not use any other USB cables except the
supplied one. (Operation is not guaranteed
with any other USB cables.)
The USB function selection screen will appear.
2 Select [PictBridge] and press the
joystick.
The [ ] indication appears on this unit’s
screen.
3 Select a file to be printed, then
press the joystick.
The number of pictures set is displayed.
4 Move the joystick up or down to
select the desired number of
prints, then press the joystick.
≥ You can set up to 9 prints.
≥ To cancel the setting, set the number of prints
to [0].
≥ Up to 8 files displayed on a page can be set in
succession by repeating steps 3 and 4.
5 Press the MENU button to
display the PictBridge menus.
6 Select the date print setting on
[DATE PRINT].
≥ If the printer is not capable of date printing, this
setting is unavailable.
7 Select the paper size setting on
[PAPER SIZE].
A
[STANDARD]: Size specific to the printer
[4t5 INCH]: L size
[5t7 INCH]: 2L size
[4t6 INCH]: Postcard size
MENU
LSQT1146.book 81 ページ ２００６年１２月５日 火曜日 午前１０時４０分