Filter
Top Products
20
LCD monitor settings
1 Hold down [POWER] for at least 2 seconds
to turn the power on.
First check that an image is displayed on the
LCD monitor, and then adjust the angle of the
monitor to the position where it is easiest to see
its displays.
2 Press [MODE] to display the thumbnail
display off screen.
3 Press [MENU].
Basic operations on the setting menus. (page
70)
4 Using [STOP] and [PLAY] select “YES” for
the “LCD SET” item on the setting menu
“DISPLAY SETUP” screen.
5 Using [STOP] and [PLAY] , select the item to
be set.
LCD COLOR LEVEL:
This adjusts the color
density of the screen.
LCD BRIGHTNESS:
This adjusts the screen
brightness.
LCD CONTRAST:
This adjusts the screen
contrast.
Basic operations (continued)
LCD SET
LCD CONTRAST
LCD BRIGHTNESS
LCD COLOR LEVEL
PUSH MENU TO RETURN
[ + ]
[ + ]
[ + ]
[ ]
_
[ ]
_
[ ]
_
DISPLAY SETUP
PUSH MENU TO RETURN
VIDEO OUT OSD
DATE/TIME
P2 CARD REMAIN
OTHER DISPLAY
LCD BACKLIGHT
LEVEL METER
CARD/BATT
LCD SET
OFF
ON
ON
OFF
PARTIAL
TOTAL
YES
6 Using [FF] or [REW], adjust the selected
item.
7 Press [MENU] 3 times to release the menu
mode.
• The adjusted values can be restored to their
factory settings by pressing [RESET].