Filter
Top Products
47
Playback
CMPNT/SDI SEL : This is used to set the format of the D connector output and HD/SD-SDI output signals.
(When SYSTEM
FREQ is set to 59.94
Hz)
AUTO Signals are output in the format in which they were recorded.
1080i 720p signals are cross-converted to 1080i signals, and output.
480i 480i format signals are output; 720p/1080i signals are down-converted to 480i
and output.
(When SYSTEM
FREQ is set to 50 Hz)
AUTO Signals are output in the format in which they were recorded.
1080i 720p signals are cross-converted to 1080i signals, and output.
576i 576i format signals are output; 720p/1080i signals are down-converted to 576i
and output.
SDI OUT ON SDI signals are output.
OFF SDI signals are not output.
SDI METADATA ON The meta-data is superimposed onto the HD-SDI signals.
OFF The meta-data is not superimposed onto the HD-SDI signals.
SDI EDH ON EDH is superimposed onto the SD-SDI signals.
OFF EDH is not superimposed onto the SD-SDI signals.
SET UP This is used to set the setup level for NTSC output during down-conversion.
• This item is not displayed on the menu when SYS TEM FREQ is set to 59.94 Hz.
0%
7.5%A
The HD/SD-SDI output signals comply with the following standards.
HD : SMPTE 292M, 296M, 299M
SD : SD: SMPTE259M-C (480/59.94i), ITU-R BT. 656-4 (576/50i)