Filter
Top Products
76
List of setting menus (continued)
The underlined settings are the factory mode settings.
DISPLAY SETUP screen
Item Description of settings
VIDEO OUT OSD When ON is selected as this item’s setting, the information displayed on the LCD
monitor is output as a video output signal together with the video signals. (Component
output signals, VIDEO output signals, SDI output signals)
ON, OFF
DATA/TIME This is used to select the setting for displaying the date and time on the LCD monitor
and video output signals.
OFF:
The date and time are not displayed.
TIME:
The time is displayed.
DATE:
The date is displayed.
TIME&DATE:
The date and time are displayed.
LEVEL METER This is used to set the audio level meter display to ON or OFF.
ON, OFF
CARD/BATT This is used to set the amount of memory remaining on the card and charge level
remaining in the battery to ON or OFF.
ON, OFF
P2 CARD REMAIN This is used to set how the amount of memory remaining on the P2 card is to be
calculated.
ONE-CARD:
The amount of memory remaining on the P2 card in the selected slot is calculated.
TOTAL:
The amount of memory remaining on the P2 cards in both slots is calculated.
OTHER DISPLAY This is used to set the amount of information to be displayed on the LCD monitor.
(Page 73)
OFF, PARTIAL, ALL
LCD BACKLIGHT This is used to adjust the backlight of the LCD monitor. The backlight becomes
brighter than usual when HIGH is selected.
HIGH, NORMAL
LCD SET This is used to adjust the display level of the images on the LCD monitor. (Page 22)
LCD COLOR LEVEL
LCD BRIGHTNESS
LCD CONTRAST
LCD REVERSE This is used to set the function for reversing the top/bottom and left/right of the images
displayed on the LCD monitor.
NORM:
The images are displayed normally.
REVERSE:
The images are displayed with their top/bottom and left/right reversed.
• The direction in which the menu highlighting moves and the direction of the cursor
movement on the thumbnail display screen cannot be reversed in either the up/
down or left/right direction.
DOWNCON MODE This is used to set the down-converter output signal mode.
SIDE CROP, LETTER-BOX, SQUEEZE