Filter
Top Products
23
Preparations
1 Hold down [POWER] for at least 2 seconds
to turn the power on.
The thumbnail screen now appears.
2 Press [MENU].
3 Using [STOP], [PLAY] and [STILL], select
“OPERATION” – “FORMAT”, and press
[STILL].
• A screen such as the one shown below
now appears. Select the number of the slot
in which the P2 card to be formatted has
been inserted. If the card is not going to be
formatted, select “EXIT”.
• If [MENU] is pressed, the menu display is
cleared.
4 Select “YES” on the confirmation screen,
and press [STILL].
• The selected P2 card is now formatted.
Formatting P2 cards
PROTECT
To prevent the data recorded on the P2 card from being deleted by mistake, set the write-protect switch on
the P2 card to PROTECT.
P2 card protection