Filter
Top Products
62
Normal displays
Screen displays
1 Time code displays
Each time [COUNTER] is pressed, the following
data (or no information displayed) is selected
in turn.
COUNTER: (Only during recording standby or
recording)
Counter value
TC:
Time code value: [TC
∗
] is displayed when the
time code value could not be read correctly
from the P2 card.
UB:
User’s bit: [UB
∗
] is displayed when the user’s
bit value could not be read correctly from the
P2 card or tape.
FR:
Information on the frame rate of recordings
shot by the camera recorder such as the AG-
HVX200
FR 60I : 60i interlace mode
(60 fields per second)
FR 60P : 60P progressive mode
(60 frames per second)
FR 30P : 30P progressive mode
(30 frames per second)
FR 24P : 24P progressive mode
(24 frames per second)
FR 24PA
: 24P advanced mode
(24 frames per second)
FR 50I : 50i interlace mode (50 fields per
second)
FR 50P : 50P progressive mode (50 frames
per second)
FR 25P : 25P progressive mode (25 frames
per second)
FR―― : No information
No information displayed
2 Warning information
P2
:
This blinks when a P2 card has not been
inserted or if it is write-protected.
P2
FULL :
This blinks when there is no more free
memory on the P2 card.
:
This blinks when there is no charge left in the
battery.
:
This blinks when the internal battery for the
calendar has no charge left. (Page 25)
3 System format displays
HD1080i:
Recording and playback in the 1080i
DVCPRO HD format
HD720P:
Recording and playback in the 720P
DVCPRO HD format
HD720P30PN:
720P 30PN native playback (in 60 Hz areas
only), no recording
HD720P24PN:
720P 24PN native playback (in 60 Hz areas
only), no recording
HD720P25PN:
720P 24PN native playback (in 50 Hz areas
only), no recording
S
1394TC
QU
JUN 19 2005 23 : 59 : 59
60 : 24P
1
TC 12 : 34 : 56 : 00 106 mn
1 2
HD1080i 24PN
C
H
2
C
H
VOLUME
[ + ]
[ ]
_
P2
60
USBHOST
TEXT MEMO
REPEAT
FULL
1
3
4
5
6
7
8
2
1617
10
11
12
13
14
15
18
9