Filter
Top Products
[Wide dynamic range (WDR)]
Select “On” or “Off” to determine whether or not to activate the wide dynamic range function.
This function compensates brightness so that it produces clearer images even if objects have various
illumination intensities.
• On: The wide dynamic range function will work.
• Off: The wide dynamic range function will not work.
• Default: Off
Note
• When the wide dynamic range function is activated, noise may be increased in the dark area of the
object.
• When “Outdoor scene”
SC384
SC384
, “ELC(1/30s)”
SW175
SW175
SW174W
SW174W
SW172
SW172
ST165
ST165
ST162
ST162
, “Indoor
scene (60 Hz)”, or “Indoor scene (50 Hz)” is selected for “Light control mode”, this setting is available.
[Face WDR]
The “Face WDR” setting can calibrate the illuminance level of people's faces on images to improve the visibility
by synchronizing the face detection function with the wide dynamic range function when their faces are too
dark to recognize.
Select “On” or “Off” to determine whether or not to interact with the face detection function.
• On: The interactive control with face detection will work. The wide dynamic range controls over around
face.
• Off: The interactive control with face detection will not work.
• Default: Off
Note
• When “Off” is selected for “Wide dynamic range”, it is impossible to activate the “Face WDR” setting.
• There may be some cases that the effect is not distinct when the faces are too dark to recognize due
to strong backlight.
[Adaptive black stretch]
Select “On” or “Off” to determine whether or not to activate the darkness compensation function. The darkness
compensation function can make darker parts of images brighter by digital image processing.
• On: Activates the darkness compensation function.
• Off: Deactivates the darkness compensation function.
• Default: Off
IMPORTANT
• When “On” is selected for “Adaptive black stretch”, noise in the darker parts may be increased, and
parts around borders between the darker parts and the brighter parts may become darker/brighter than
the other darker/brighter parts.
Note
• When “On” is selected for “Wide dynamic range”, the “Adaptive black stretch” setting is unavailable.
[Back light compensation (BLC)]
Select “On” or “Off” to determine whether or not to activate the back light compensation (BLC) function. When
“On” is selected for “Wide dynamic range”, this setting is unavailable.
The back light compensation function can compensate back light by setting mask areas on brighter parts of
images.
• On: Mask areas will be set automatically.
• Off: Mask areas will not be set automatically. It is necessary to set them manually.
Operating Instructions 107
11 Configure the settings relating to images and audio [Image/Audio]