Panasonic WV-SC380 Security Camera User Manual


 
[1] button: The letter “1” will turn green and images in the main area will be displayed in accordance
with the setting of “H.264(1)” (or “MPEG-4(1)”). (®page 84, page 90)
[2] button: The letter “2” will turn green and images in the main area will be displayed in accordance
with the setting of “H.264(2)” (or “MPEG-4(2)”). (®page 84, page 90)
[Image capture size] buttons
These buttons will be displayed only when a JPEG image is displayed.
[VGA] The letters “VGA” will turn green and images in the main area will be displayed
in VGA size.
[QVGA] The letters “QVGA” will turn green and images in the main area will be displayed
in QVGA size.
[640x360] The letters “640x360” will turn green and images in the main area will be
displayed in 640 x 360 (pixels).
[320x180] The letters “320x180” will turn green and images in the main area will be
displayed in 320 x 180 (pixels).
SW396
SW396
SW395
SW395
SC386
SC386
SC385
SC385
SC384
SC384
SW175
SW175
SW174W
SW174W
ST165
ST165
:
[1280x960] The letters “1280x960” will turn green and images in the main area will be
displayed in 1280 x 960 (pixels).
[1280x720] The letters “1280x720” will turn green and images in the main area will be
displayed in 1280 x 720 (pixels).
SW396
SW396
SW395
SW395
SC386
SC386
SC385
SC385
SW172
SW172
ST162
ST162
:
[800x600] The letters “800x600” will turn green and images in the main area will be
displayed in 800 x 600 (pixels).
Note
SW396
SW396
SW395
SW395
SC386
SC386
SC385
SC385
SC384
SC384
SW175
SW175
SW174W
SW174W
ST165
ST165
:
The buttons [VGA], [QVGA] and [1280x960] are displayed only when “4:3”
*2
or “4:3 (VGA)”
*3
is
selected for “Aspect ratio”.
The buttons [640x360], [320x180] and [1280x720] are displayed only when “16:9” is selected for
“Aspect ratio”.
When “1280x960” or “1280x720” is selected for the image capture size, it may become smaller
than the actual size depending on the window size of the web browser.
SW172
SW172
ST162
ST162
:
The buttons [VGA], [QVGA] and [800x600] are displayed only when “4:3” is selected for “Aspect
ratio”.
The buttons [640x360] and [320x180] are displayed only when “16:9” is selected for “Aspect
ratio”.
[Image quality] buttons
These buttons will be displayed only when a JPEG image is displayed.
[1] button: Images in the main area will be displayed in accordance with the setting for “Quality1” of
“Image quality setting”. (®page 80)
[2] button: Images in the main area will be displayed in accordance with the setting for “Quality2” of
“Image quality setting”. (®page 80)
[AUX] buttons
*4
These buttons will be displayed only when “AUX output” is selected for “Terminal 3” of “Alarm” on the setup
menu. (®page 134)
[Open] button: The letters “Open” on the button will turn green and the status of AUX connector will
be open.
Operating Instructions 13
1 Monitor images on a PC