Filter
Top Products
20 Maintenance of the camera [Maintenance]
System log check, firmware upgrade, status check and initialization of the setup menu can be performed on
this page.
The “Maintenance” page has 4 tabs; the [System log] tab, the [Upgrade] tab, [Status] tab and the [Default
reset] tab.
20.1 Check the system log [System log]
Click the [System log] tab of the “Maintenance” page. (®page 47, page 49)
SW396
SW396
SW395
SW395
SC386
SC386
SC385
SC385
SC384
SC384
SW175
SW175
SW172
SW172
ST165
ST165
ST162
ST162
:
Up to 4,000 system logs can be saved on the SD memory card when the SD memory card is inserted after
selecting “Use” for “SD memory card” on the [SD memory card] tab (®page 58).
The system logs will be displayed in group of 100 logs each.
When using the SD memory card, the logs will be saved even when the power of the camera is turned off.
When not using the SD memory card, the logs will be deleted when the power of the camera is turned off.
When “Not use” is selected for “SD memory card”, up to 100 system logs can be saved on the built-in memory
of the camera.
When the saved system logs have reached the maximum number, the newer logs will overwrite the older
system logs. In this case, the oldest log is the first to be overwritten.
SW174W
SW174W
:
Up to 100 system logs can be saved on the built-in memory of the camera. When the saved system logs have
reached the maximum number, the newer logs will overwrite the older system logs. In this case, the oldest log
is the first to be overwritten. The logs will be deleted when the power of the camera is turned off.
[Next 100 >>]
SW396
SW396
SW395
SW395
SC386
SC386
SC385
SC385
SC384
SC384
SW175
SW175
SW172
SW172
ST165
ST165
ST162
ST162
When clicking “Next 100 >>”, the next 100 system logs will be displayed.
[<< Previous 100]
SW396
SW396
SW395
SW395
SC386
SC386
SC385
SC385
SC384
SC384
SW175
SW175
SW172
SW172
ST165
ST165
ST162
ST162
When clicking “<< Previous 100”, the previous 100 system logs will be displayed.
[No.]
The serial number of the system log will be displayed.
[Time & date]
Time and date at the error occurrence will be displayed.
Note
• When “Off” is selected for “Time display format” on the [Basic] tab (®page 53), time & date of logs will
be displayed in 24-hour format.
[Description]
The descriptions about the system log will be displayed. Refer to page 227 for further information about the
system logs.
216 Operating Instructions
20 Maintenance of the camera [Maintenance]