Filter
Top Products
When an image is clicked by the mouse, the clicked position becomes the center of the image (Click &
Centering).
The display position of images can also be changed from the fisheye control screen.
Fisheye Control
When the [Fisheye Control] button is clicked on the Quad PTZ or Single PTZ screen, the “Fisheye Control”
window is displayed.
1
1
3
2
4
From this window, the image position of each screen number can be changed.
By dragging and dropping the number icon on the screen onto the image, you can change the center of the
image to where the icon was dropped.
The red number icon is the selected number.
Select the “Refresh interval” value of “Fisheye Control” images from the following.
3s/ 5s/ 10s/ 30s/ 60s
4. Single PTZ
In the Single PTZ screen, distortion in 1 fisheye image is corrected and the corrected image is displayed in a
4:3 image.
When the mouse button is used to click on an image, the clicked position of this image can be moved to the
center of the image (Click & Centering).
12 Operating Instructions
1 Monitor images on a PC