Filter
Top Products
Note
• When “3M Fisheye [4:3]” or “VGA Quad streams [4:3]” is selected for “Image capture mode”, the
“System” setting is unavailable.
Priority stream
[Activation]
Select “On” or “Off” to determine whether or not to use the priority stream.
• Default: Off
Note
• When “On” is selected for “Activation” of “Priority stream”, number of users who can access the camera
may be limited.
[Destination IP address(1)]
Enter the first destination IP address.
[Destination IP address(2)]
Enter the second destination IP address.
[Stream type]
Select either “JPEG”, “H.264(1)” or “H.264(2)”.
• JPEG: JPEG images will be transmitted.
• H.264(1): H.264(1) images will be transmitted.
• H.264(2): H.264(2) images will be transmitted.
When the “Image capture mode” type is 2 Monitor (Max. 15 fps), the following settings are available.
• Panorama + Quad PTZ, Panorama + Single PTZ: JPEG, H.264(1)[Panorama], H.264(2)[Quad PTZ], or
H.264(2)[Single PTZ] images will be transmitted.
• Double Panorama + Quad PTZ, Double Panorama + Single PTZ: JPEG, H.264(1)[Double Panorama],
H.264(2)[Quad PTZ], or H.264(2)[Single PTZ] images will be transmitted.
• Default: JPEG
Note
• When “H.264(1)” is selected with “Recording format” of the SD memory card, because “H.264(1)”
images are not transferred, images are not transmitted with priority stream.
In the same manner, when “H.264(2)” is selected with “Recording format” of the SD memory card,
because “H.264(2)” images are not transferred, images are not transmitted with priority stream.
Operating Instructions 147
15 Configure the settings relating to the authentication [User mng.]