Panasonic WV-SW458ME Security Camera User Manual


 
Example of entry:
Example when entering an IPv4 address: http://192.168.0.10:8080
Example when entering an IPv6 address: http://[2001:db8:0:0:0:0:0:1]:8080
To access the cameras using the HTTPS protocol, enter as follows:
Example of entry: https://192.168.0.10/
Available number of characters: 1 - 128 characters
Default: (Cam. 1) selfcamera, (Cam. 2 - 16) not registered
IMPORTANT
When accessing the camera using the HTTPS protocol, install the security certificate of the camera to
display images on the monitor. (®page 169)
This camera is specified when “selfcamera” is displayed for the IP address or host name.
Note
When using the host name, it is necessary to configure the DNS settings of the PC to be used for the
multi-screen display. Refer to the network administrator for information on the DNS setting of PCs.
BB-HCM series cameras can register to the multi-screen and display their images there.
[Camera title]
Enter the title of the camera. The entered camera title will be displayed on a multi-screen.
Available number of characters: 0 - 20 characters
Unavailable characters: " &
Default:
(Cam. 1) Varies as follows depending on the model in use.
WV-SW458
SW458
SW458
/WV-SF438
SF438
SF438
(Cam. 2 - 16) None (blank)
Note
When selecting a 16 split-screen, some characters of the camera title to be displayed may not be
displayed.
Even if “16:9” aspect ratio (Panorama or Double Panorama) is set, a “4:3” image is displayed in the
multi-screen.
124 Operating Instructions
12 Configure the multi-screen settings [Multi-screen]