Panasonic WV-SW458ME Security Camera User Manual


 
Note that JPEG images cannot be displayed when Quad stream (Max. 30 fps) is selected.
1.2 About live image types
The type of images displayed on the “Live” page can be selected using “Image capture mode” on the [JPEG/
H.264] tab of the “Image/Audio” page of the setup menu. (®page 85)
Configure the type, operation, and resolution of live images on this section.
1.2.1 Type of images that can be displayed according to the image
setting
There are 4 types of settings for Image capture mode: “1 Monitor (Max. 30 fps)”, “2 Monitor (Max. 15 fps)”,
“Quad stream (Max. 30 fps)”, and “3M Fisheye (Max. 15 fps)”. The type of images that can be displayed and
the supported mounting positions differ for each type. Check which images can be displayed in the following
table.
Refer to page 9 for further information about “Image capture mode”.
Refer to page 10 for each image.
Image capture mode type
Image capture mode Image types Mounting positions
1 Monitor (Max. 30 fps)
This type transmits 1 type of
image. A maximum of 30 fps
transmissions are possible.
2M Panorama [16:9]
1M Panorama [16:9]
Panorama wall
2M Double Panorama [16:9]
1M Double Panorama [16:9]
Double Panorama ceiling
1.3M Fisheye [4:3] Fisheye ceiling, wall
1.3M Quad PTZ [4:3] Quad PTZ ceiling, wall
1.3M Single PTZ [4:3] Single PTZ ceiling, wall
2 Monitor (Max. 15 fps)
This type transmits 2 types of
images. A maximum of 15
fps transmissions are
possible.
Panorama + Quad PTZ Panorama, Quad
PTZ
wall
Panorama + Single PTZ Panorama, Single
PTZ
wall
Double Panorama + Quad
PTZ
Double Panorama,
Quad PTZ
ceiling
Double Panorama + Single
PTZ
Double Panorama,
Single PTZ
ceiling
Quad stream (Max. 30 fps)
This type transmits 4 types of
VGA images with H.264.
VGA Quad streams [4:3] Quad stream ceiling
3M Fisheye (Max. 15 fps) 3M Fisheye [4:3] Fisheye ceiling, wall
1.2.2 About Image capture mode
The following types of images can be transmitted by each “Image capture mode” setting.
Operating Instructions 9
1 Monitor images on a PC