Filter
Top Products
C3412M-D (12/08) 59
4. Edit preset camera settings:
a. Use the joystick to position the cursor beside EDIT CAMERA SETTINGS.
b. Press Iris Open. The EDIT CAMERA SETTINGS window appears on the monitor. Refer
to Camera on page 38 and Advanced Camera Settings on page 42 to change preset
camera settings.
c. To edit the camera settings schedule, use the joystick to position the cursor beside
EDIT SCHEDULE. Press Iris Open.
The Edit Schedule menu is a duplicate of the Edit Event menu (refer to Event on
page 80) with the following exceptions. In the Edit Schedule menu, the event type
cannot be changed. Also, the Holiday feature cannot be accessed from the Edit
Schedule menu.
For instructions on changing the features in the Edit Schedule menu, refer to Edit
Event on page 83.
Notes:
• For 23X and 35X models, there are two additional options available for the IR cut filter that are
only available when programming a preset. The additional settings are IN and OUT. If the IR cut
filter is set to IN, the preset scene will be in color. If the IR cut filter is set to OUT, the preset
scene will be in black-white.
• You can copy camera settings from one preset to another preset. To copy camera settings do
the following:
(1) Use the joystick to position the cursor beside COPY CAMERA SETTINGS.
(2) Press Iris Open. The cursor moves to the right.
(3) Move the joystick up or down to view selections. Press Iris Open to enter selection.
EXIT
SPECTRA IV
LANGUAGE
<SYSTEM INFORMATION>
<DISPLAY SETUP>
<DOME SETTINGS>
ACK ALERT*
RESET CAMERA
CYCLE CAMERA POWER
REBOOT SYSTEM
BACK
EXIT
<CAMERA>
<MOTION>
<POWER UP>
<LINE SYNC>
<PRESETS>
<PATTERNS>
<ZONES>
<WINDOW BLANKING>
<ALARMS>
<AUX>
<TITLE TEXT>
<ALERT>*
<CLEAR>
<PASSWORD>
<CLOCK>
<EVENT>
DOME SETTINGS
PRESET NUMBER 1
* * * PRESET NOT DEFINED * * *
<EDIT PRESET LABEL>
<EDIT PRESET SCENE>
<EDIT CAMERA SETTINGS>
<MOTION DETECTION>
<EDIT SCHEDULE>
<CLEAR PRESET>
<CLEAR CAMERA SETTINGS>
BACK
EXIT
REFERENCE INFORMATION
AZIMUTH -
ELEVATION -
ZOOM RATIO -
CUSTOM CAMERA SETTINGS -
PRESETS
*This setting applies only to Pressurized Spectra IV dome systems.