Filter
Top Products
C3412M-D (12/08) 81
EVENT TYPE
Any of the available event types can be selected from this menu, or you may select ALL EVENTS
to manage the events as a group.The following are the settings for event type:
SCAN: A scan event executes a specified scan (random, auto, or frame scan) using the limit
stops and scan speed defined in the Motion menu. Refer to Motion Settings on page 50.
PARK: A park event executes the user-defined park action as specified in the Motion menu.
Refer to Park Action on page 51.
WINDOW BLANKING: A window blanking event activates or deactivates a previously defined
window blank. The window blank remains activated or deactivated until another programmed
event changes the state of the window or you modify it through the Window Blanking menu.
Refer to Window Blanking on page 65.
AUX: An auxiliary event turns on/off an auxiliary output when the event triggers. Refer to Aux on
page 71.
ALARM: An alarm event executes the action associated with the specified alarm number. Refer
to Alarms on page 68.
PATTERN: A pattern event starts a previously defined pattern when the event is triggered. Refer
to Patterns on page 63.
CAMERA: A camera event assigns the camera settings of a preset to the current camera
settings located in the Camera menu. Refer to Camera on page 38. The preset that is referenced
by the event must be defined prior to setting up a camera event.
For the camera event to function, the referenced preset must have Custom Camera Settings
activated. Refer to Presets on page 57.
Note: If you have camera settings defined in the Camera menu that you wish to restore
following a camera event which overwrites those settings, you must save the original settings as
a separate preset prior to the camera event being triggered. You can then set a second camera
event to call the preset that has the original settings saved. Camera settings can also be changed
manually from the Camera menu following the original camera event.
PRESET: A preset event executes a previously defined preset when the event is triggered. Refer
to Presets on page 57.
Note: The event type cannot be changed if you are accessing it through the Edit Schedule option
from the Preset, Pattern, Window Blanking, Alarm, or Aux menu.
EXIT
SPECTRA IV
LANGUAGE
<SYSTEM INFORMATION>
<DISPLAY SETUP>
<DOME SETTINGS>
ACK ALERT*
RESET CAMERA
CYCLE CAMERA POWER
REBOOT SYSTEM
BACK
EXIT
<CAMERA>
<MOTION>
<POWER UP>
<LINE SYNC>
<PRESETS>
<PATTERNS>
<ZONES>
<WINDOW BLANKING>
<ALARMS>
<AUX>
<TITLE TEXT>
<ALERT>*
<CLEAR>
<PASSWORD>
<CLOCK>
<EVENT>
DOME SETTINGS
EVENT
EVENT TYPE
EVENT LABEL
<EDIT EVENT LABEL>
<EDIT EVENT>
<CLEAR EVENT>
<LIST EVENT>
HOLIDAY
<EDIT HOLIDAY>
<CLEAR HOLIDAY>
<LIST HOLIDAYS>
BACK
EXIT
REFERENCE INFORMATION
*This setting applies only to Pressurized Spectra IV dome systems.