Filter
Top Products
C3412M-D (12/08) 89
Software/Language File Upload
The RJ-45 data port of the dome drive allows access for on-site setup, testing, and uploading of revised operating
software and language files. A Pelco field service tool is required to perform these operations. Field service tools include
Pelco’s remote monitor kit (IPS-RMK), remote data port box (IPS-RDPE-2), and remote monitor cable (IPS-CABLE).
For instructions on how to upload revised operating software and language files refer to the Installation/Operation manual
supplied with the field service tool.
Note: Only perform software uploads when necessary. Software uploads do not need to be performed if the dome system
is operating properly.
During a software/language file upload, a progress bar will appear on the monitor to indicate data is being transferred to
the Spectra dome system. The default setting for data transmission is 115.2 KB per second. Noisy and long-run
connections will slow the transmission rate.