Filter
Top Products
16 Pelco Manual C1902M (11/96)
7.2 CARE OF THE UNIT
• Remove dust or dirt on the surface of the lens or
CCD with a blower.
• Use a soft, dry cloth to clean the body. If it is very
dirty, use a cloth dampened with a small quantity
of a neutral detergent, then wipe dry.
• Avoid using volatile solvents such as thinner, al-
cohol, benzene and insecticides. They may dam-
age the surface finish and/or otherwise impair the
operation of the camera.
CAUTION: The camera should
not be pointed at the sun, or used
for shooting very bright objects, as
the CCD imager may be perma-
nently damaged
8.0 MAINTENANCE
These color cameras, as shipped, are factory adjusted
and tested for optimum performance in most applica-
tions. No additional camera setup procedures should
normally be required. However, improved performance
may be obtained in some applications by field setup.
Setup should be limited to the procedures described
herein.