Filter
Top Products
Pelco Manual C1902M (11/96) 17
9.0 SPECIFICATIONS
Image Device: 1/3" interline transfer type CCD
Effective Picture Elements:
CC4600-2: 768 (horizontal) x 494 (vertical)
CC4600-2X/
CC4600-3: 752 (horizontal) x 582 (vertical)
Lens Mount: C-mount/CS-mount adjustable
Signal System:
CC4600-2: NTSC/EIA color system
CC4600-2X/
CC4600-3: PAL/CCIR color system
Synchronization
System: Internal/line lock
Horizontal
Resolution: 470 lines
Minimum
Illumination: 1.9 lux, F1 .2 (with AGC set to ON in
TURBO mode)
Video Output: 1 Vp-p, 75 ohm, negative sync
Video S/N: 50 dB (with AGC set to OFF)
White Balance: ATW/ATW PRO (switchable)
Automatic Gain
Control (AGC): Switchable: ON/OFF with Gain up
(TURBO/NORM) switch in TURBO
position and AGC ON, a 6 dB gain
increase over NORM mode results.
Power Requirements:
CC4600-2: 24 VAC (60 Hz)
CC4600-2X: 24 VAC (50 Hz)
CC4600-3: 220-240 VAC (50 Hz)
Power Consumption:
CC4600-2/
CC4600-2X: Less than 4.5 W
CC4600-3: 5.5 W
Operating
Temperature: 14° to 122° F (-10° to 50° C)
Operating
Humidity: 20 to 80%
Storage
Temperature: -40° to 140° F (-40° to 60° C)
Storage
Humidity: 20 to 80%
Shock
Resistance: 70 G
Weight:
CC4600-2/
CC4600-2X: 550 g (1.20 lbs)
CC4600-3: 770 g (1.68 lbs)
Construction: Steel case
Finish: Neutral Gray
Dimensions: See Figure 6
Design and specifications are subject to change with-
out notice.
Figure 6. CC4600 Series Dimension Drawing
NOTE: VALUES IN PARENTHESES ARE MILLIMETERS;
ALL OTHERS ARE INCHES
5.50 (139.70)
1/4-20 MOUNT NUT
(TOP AND BOTTOM)
5.06
(128.52)
1.38
(34.93)
5.50 (139.70)
2.56
(65.09)
CS
C
CS
C
2.75
(69.85)
1.09
(27.69)
2.19
(55.56)
2.13 (53.97)