Pelco CC4600 Series Camcorder User Manual


 
2 Pelco Manual C1902M (11/96)
CAUTION
RISK OF ELECTRIC
SHOCK. DO NOT OPEN
1.1 FCC INFORMATION
For USA customers
WARNING - This equipment has been tested and found to com-
ply with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the
equipment is operated in a residential installation. This equip-
ment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instruc-
tions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harm-
ful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of
the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and re-
ceiver.
- Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
- Consult the dealer or an experienced audio/TV techni-
cian for help.
Intentional or unintentional changes or modifications not ex-
pressly approved by the party responsible for compliance shall
not be made. Any such changes or modifications could void
the user’s authority to operate the equipment.
The user may find the following booklet prepared by the Federal
Communications Commission helpful: “How to Identify and Re-
solve Radio-TV Interference Problems”. This booklet is avail-
able from the U.S. Government Printing Office, Washington, DC
20402, Stock No. 004-000-00345-4.
For United Kingdom customers
WARNING
THIS APPARATUS MUST BE EARTHED
IMPORTANT
The wires in the power supply lead are colored in accordance
with the following code:
Green-and-yellow: Earth
Blue: Neutral
Brown: Live
As the colors of the wires in the power lead of this apparatus
may not correspond with the colored markings identifying the
terminals in your plug proceed as follows:
The wire which is colored green-and-yellow must be connected
to the terminal in the plug which is marked by the letter E or by
the safety earth symbol or colored green or green-and-
yellow.
The wire which is colored blue must be connected to the termi-
nal which is marked with the letter N or colored black.
The wire which is colored brown must be connected to the
terminal which is marked with the letter L or colored red.
1.2 SAFETY PRECAUTIONS
CAUTION: TO REDUCE THE RISK OF ELECTRI-
CAL SHOCK DO NOT OPEN COVERS. NO USER
SERVICEABLE PARTS INSIDE. REFER SERVIC-
ING TO QUALIFIED SERVICE PERSONNEL.
This label may appear on the bottom of the unit due to space
limitations.
The lightning flash with an arrowhead symbol,
within an equilateral triangle, is intended to alert
the user to the presence of uninsulated “dan-
gerous voltage” within the product’s enclosure
that may be of sufficient magnitude to consti-
tute a risk of electric shock to persons.
The exclamation point within an equilateral tri-
angle is intended to alert the user to presence
of important operating and maintenance (ser-
vicing) instructions in the literature accompa-
nying the appliance.
Warning
To prevent fire or shock hazard, do not expose units
not specifically designed for outdoor use to rain or
moisture.
WARNING: Electrostatic-sensitive device. Use proper
CMOS/MOSFET handling precautions to avoid electro-
static discharge.
NOTE: Grounded wrist straps must be worn and proper
ESD safety precautions observed when handling the
electrostatic-sensitive printed circuit boards.
1.3 UNPACKING
The shipping carton is the safest container in which the unit
may be transported. Save it for possible future use.
Supplied
Accessories: 4-pin plug for auto iris lens (1); Operating
Instructions (1)