Pentax 15086 Digital Camera User Manual


 
77
Shooting Functions
4
2
Turn the e-dial to adjust the
value.
5 appears on the monitor before the
value that can be changed.
The following parameters can be changed
depending on the selected exposure
mode.
3
When set to a mode, press the
mc button (1), and then turn
the e-dial (2) to change the
aperture value.
The exposure compensation value can
be adjusted by this operation in e/b/c
mode. (p.80)
e
Item set in [Green Button] of the [A Rec. Mode 3] menu (p.146)
b
Shutter speed
c
Aperture value
a
Shutter speed
A proper exposure may not be obtained with the selected shutter speed and
aperture value when the sensitivity is set to the fixed value (p.75).
Use an optional ND (Neutral Density) filter if the subject is too bright. Use a
flash if it is too dark.
•In a mode, the difference from the proper exposure is displayed in a bar
graph while the shutter speed or aperture value is adjusted. The exposure
value is displayed in red when the difference from the proper exposure
becomes ±3.0 or larger.
You can set the function of the d/i button when the exposure mode is set
to a. Set in [Green Button] of the [A Rec. Mode 3] menu. (p.147)
Sensitivity values higher than ISO 1600 are not available when the shutter
speed is set to 2 sec. or slower in b/a mode.
1/
2000
1/
2000
F2.8
F2.8
1600
1600
[
37
]
[
37
]
2
1