Filter
Top Products
101
Shooting Functions
4
3
Use the four-way controller (45)
to select Q or R, and press the
4 button.
The camera returns to the control panel.
4
Press the shutter release button halfway.
k appears on the monitor and the
Shake Reduction function is activated.
Q
On Uses Shake Reduction. (default setting)
R
Off Does not use Shake Reduction.
Be sure to set to R when using the camera with a tripod.
• You can also change the settings from the [A Rec. Mode 2] menu (p.70).
• [Shake Reduction] is fixed to R in the following situations.
- Self-timer shooting - Remote Control shooting
- when p mode is set
- when HDR Capture is set, and [Auto Align] is set to P (Off)
• [Shake Reduction] is fixed to Q in Z (Night Scene HDR) of H mode.
• You can select whether to use the Shake Reduction function only when
taking pictures or during standby mode as well with [15. Shake Reduction
Options] (p.73) from the [A Custom Setting 3] menu. To extend the battery
life, set this to not operate during standby mode.
• The Shake Reduction function will not fully work (for about 2 seconds)
immediately after the camera is turned on or is restored from Auto Power Off.
Wait for the Shake Reduction function to work stably and properly before
shooting.
Shake Reduction
Shake Reduction
On
On
OK
OK
OK
Cancel
Cancel
MENU
1/
2000
1/
2000
F2.8
F2.8
1600
1600
[
37
]
[
37
]