Filter
Top Products
22
Before Using Your Camera
1
Various information appears on the monitor depending on the status of the
camera.
In standby mode, the current settings for shooting are displayed on the
monitor.
Press the M button to display the “control panel” and change settings.
(p.24)
If you press the M button while the control panel is displayed, you can
select the type of information displayed in standby mode. Use the four-way
controller (2345) to select a display type, and press the 4 button to
set the standby mode screen.
Monitor Display
The brightness level and the color of the monitor can be adjusted. (p.192)
Capture Mode
Screen Display Displayed Information
Standard
Information Display
The Live View image and the shooting function settings are
displayed. (p.23)
No Information
Display
Only the Live View image is displayed. Press the shutter
release button halfway to display the shutter speed, aperture
value, sensitivity and number of recordable images.
Display Off
Nothing is displayed on the monitor. The shutter speed,
aperture value and sensitivity are displayed while the
exposure is set with the e-dial.
Not available when the mode dial is set to C.
Electronic Compass
The current latitude, longitude, altitude, direction, and
Coordinated Universal Time (UTC) are displayed. Press the
shutter release button halfway to return to [Standard
Information Display].
Available only when the optional GPS unit O-GPS1 (p.243)
is attached to the camera and is operating.
Cancel
Cancel
MENU
Standard Information Display
Standard Information Display
OK
OK
OK
1/
2000
1/
2000
F2.8
F2.8
1600
1600
[
37
]
[
37
]
MM
Custom Image
Custom Image
Bright
Bright
65535
65535
Standby mode
(Standard Information Display)
Control panel Standby mode
display selection