Pentax A10 Digital Camera User Manual


 
36
Common Operations
3
1 Confirm the SD Memory Card is set in the camera.
2 Hold down the Q Playback button for more than four
seconds in Capture Mode.
The lens retracts two seconds after you start holding down the Q
Playback button, and the contents of the built-in memory are displayed
two seconds later.
1 Press the power switch while pressing the Q Playback
button.
The power indicator lights green and the camera turns on in the
Playback mode with the lens retracted.
Press the Q Playback button to extend the lens and switch to the
Capture mode.
Hold down the Q Playback button for more than two seconds in
the Capture mode or press the Q Playback button in the Voice
Recording mode to switch to the Playback mode with the lens
retracted.
When you turn the power off and on or switch from Playback Mode
to Capture Mode, the My Album function is canceled and the SD
Memory Card becomes activated.
While using the My Album function, you cannot access the SD
Memory Card, so you cannot copy files between the built-in
memory and the SD Memory Card. Cancel the My Album function
to copy the files.
While using the My Album function, you cannot perform
formatting.
To Copy Files from the SD Memory Card to the Built-in
Memory 1 p.147
Turning the Camera On in Playback Mode
The power may be turned off when the power switch is held for a
while.
Playing Back Still Pictures 1p.33