Pentax A10 Digital Camera User Manual


 
65
Taking Pictures
4
You can switch the Drive mode to Continuous Shooting mode. Pictures
are taken continuously while the shutter release button is pressed.
1 Press the four-way controller (2) in Capture mode.
2 Press the four-way controller
(45) to select j.
3 Press the OK button.
The camera is ready to take pictures
continuously.
4 Press the shutter release button
halfway.
The focus frame on the LCD monitor will light green when the camera
is in focus.
5 Press the shutter release button fully.
Pictures are taken continuously while the shutter release button is
pressed.
Shooting stops when you take your finger off the shutter release
button.
Continuous Shooting
(Continuous Shooting Mode)
You can continue shooting until the SD Memory Card or the built-
in memory is full.
The interval will vary according to the [Recorded Pixels] and
[Quality Level] settings.
Shutter release button
Four-way controller
OK button
OK
OK
OK
OK
Drive Mode
Drive Mode
Continuous Shooting
Continuous Shooting
Drive Mode
Continuous Shooting