Filter
Top Products
125
BASIC OPERATION
(PREPARATION)
BASIC OPERATION
(SHOOTING)
ADVANCED OPERATIONSOTHERS
1. Remove the hot shoe cover FK from the camera.
2. Attach the hot shoe adapter F
G to the camera.
3. Connect the extension cord F5P to the hot shoe adapter F
G.
4. Attach the Off-Camera shoe adapter F to a tripod.
5. Connect the extension cord F5P to the Off-camera shoe
adapter F.
6. Press the flash pop up button to activate the built-in flash.
7. Confirm that the all flash units are fully charged.
8. Focus on the subject and take a picture.
✍
MEMO
• The AF500FTZ can be connected directly to the Extension cord F5P
without Off-camera shoe adapter F.
• The AF400T flash cannot be used with the built-in flash simultaneously
because the 4P sync cord B from the AF400T will interrupt the function
of the built-in flash.