Filter
Top Products
65
BASIC OPERATION
(PREPARATION)
BASIC OPERATION
(SHOOTING)
ADVANCED OPERATIONSOTHERS
• If you take a finger off from the shutter release button during auto
bracketing, the auto bracketing exposure setting will remain effective for
about 20 seconds and you can take the next picture by pressing the
shutter release button again. In this case, auto focusing works for each
frame.
• You can combine this function with the built-in flash or external flash
(TTL and P-TTL auto only) to change the amount of flash
consecutively. Make sure the external flash is fully charged before
pressing the shutter release button each time.
• You can change the auto bracketing sequence using the custom
function number [CF1]. See pages 134 and 136.
• Auto bracketing is automatically canceled after the third frame is
exposed.You can change this setting using the custom function [CF2].
See pages 134 and 137.
• You can combine this function with the consecutive shooting mode. In
this case, you can take consecutive auto bracketing shots by pressing
the shutter release button continuously.
• You can combine this function with the self-timer mode or the remote
control shooting mode. In this case, the camera returns to single-frame
drive mode after shooting the third frame.
Taking pictures under exposer or over exposer only
You can use the auto bracketing mode for only under exposure or
over exposure shots by combining the operation with exposure
compensation. In this case, the specified exposure compensation
value is used for auto bracketing. See page 85.