Filter
Top Products
55
BASIC OPERATION
(PREPARATION)
BASIC OPERATION
(SHOOTING)
ADVANCED OPERATIONSOTHERS
Consecutive Shooting
Pictures can be taken consecutively while the shutter release
button is held down.
1 Press the drive mode button
until appears on the
LCD panel.
✍
MEMO
• When the focus mode switch is set to (single), the focus is
locked for the first frame and used for subsequent consecutive frames.
• When the focus mode switch is set to (continuous), the camera
tries to focus on the subject each time the shutter is released; however,
the focus may be incomplete for consecutive frames.
• The shutter cannot be released while the built-in flash is being charged.
To enable shutter release before the built-in flash is ready, use custom
function number [CF7]. See pages 134 and 138.
2 Shoot consecutive frames.
1. Press the shutter release button halfway down to focus
the subject.
2. Press and hold down the shutter release button
completely.
3. To stop taking consecutive pictures, take your finger off
of the shutter release button.