[CF6] Superimposing the focus points
1 Superimposes the focus points
2 Disables the superimpose function
[CF7] Enabling shutter release before the built-in flash
is fully charged
1 Disables shutter release until the flash is ready
2 Enables shutter release before the flash is charged
[CF8] Using the built-in flash as a wireless control for
the AF360FGZ
1 Discharges the built-in flash to adjust the exposure
2 Built-in flash controls the AF360FGZ
[CF9] Setting the flash pop-up button’s function
during wireless operation with the AF360FGZ
1 Disables the built-in flash
2 Discharges the built-in flash once for a test
3
Discharges the built-in flash consecutively for modeling
[CF10] Setting the film rewind method
1 Automatically rewinds the film at the end of the roll
2 Disables automatic film rewind
*To rewind the film, press the mid-roll rewind button.
[CF11]
Setting the status of the end of the film when rewound
1 Rolls up the film completely
2 Leaves the end of the film unwound
[CF12] Setting the self-timer delay time
1 Self-timer delay of 12 sec.
2 Self-timer delay of 2 sec. with mirror lock-up
[CF13] Setting the shutter release delay time with the
remote control
1 Picture taken after 3 sec.
2 Picture taken immediately
[CF14]
Setting auto focusing during remote control operation
1 Auto focusing not used
2 Auto focusing used
[CF15] Setting the LCD panel illumination
1 Illuminated when the main/preview switch is set to
preview
2 Illuminated automatically in low light condition
3 Not illuminated
[CF16] Setting the mode dial illumination
1 Illuminates
2 Does not illuminate
[CF17] Enabling shutter release with the aperture ring
set to other than the
position
1 Disables shutter release if the aperture ring is not
set to the position
2 Enables shutter release