Filter
Top Products
122
6
Editing / Settings
How to recall the [B Set-up] menu
You can register the functions you use most frequently on the four-way
controller. The functions can then be set directly by pressing the four-
way controller without displaying the [Rec.Mode] menu.
1 Select [Fn Setting] on the [B Set-up] menu.
2 Press the four-way controller (5).
The Fn Setting screen will be displayed.
3 Use the four-way controller (23) to choose the key
where you want to register a function.
4 Use the four-way controller (45) to choose the
function you want to register.
If you do not want to register a function, select Off.
5 Press the OK button twice.
The camera is ready to capture or play back images.
Registering Functions
Registering a function
• Only one function can be registered on each key of the four-way
controller.
• You can choose from the following 12 functions: Recorded Pixels,
Quality Level, White Balance, Focusing Area, AE Metering,
Sensitivity, Flash Exposure Compensation, Digital Zoom, Instant
Review, Sharpness, Saturation Contrast.
• In the default setting, a negative level of Flash Exposure
Compensation is registered for (
4) and a positive level of Flash
Exposure Compensation is registered for (
5).
• If the Flash Exposure Compensation is registered to either (
2) or
(
3), levels are compensated positively for (2) and negatively for (3).
Menu / Fn button
Rec. Mode
Wide
AWB
Auto
Quality Level
White Balance
Focusing Area
AE Metering
Sensitivity
Exit
1/3
MENU
OK
OK
2592 1944
Recorded Pixels
Four-way controller
OK button