Filter
Top Products
78
Taking Pictures
4
E a b c A d F G D C
You can take pictures using the remote control F (optional).
1 Press the ( button in Capture
mode to display
i on the LCD
monitor.
The self-timer lamp will blink and the camera
is ready to take pictures.
2 Press the shutter release button on
the remote control unit.
The self-timer lamp will blink rapidly and the picture will be taken after
approximately three seconds.
Life of the Battery for the Remote Control Unit
A signal can be sent from the remote control unit to the camera
approximately 30,000 times. If the battery needs changing, contact your
nearest Pentax customer service center. (A charge is made for
replacing the battery.)
Using the Remote Control Unit (optional)
Playing Back Images and Sound 1 p.89
• The buttons on the camera can be used in the same way.
• Please ensure that the remote control unit is no more than 5 meters
away from the front of the camera.
• The distance at which the remote control unit operates may be
reduced when taking pictures against the light.
• Press the
( button in step 1 to display h on the LCD monitor to
take a picture immediately after pressing the shutter release button
on the remote control unit.
1
2
198
198
198
11:19
11:19
11:19
10/20/2003
10/20/2003
10/20/2003