Filter
Top Products
33
Quick Start
2
Press the shutter release button slowly in two steps. This allows for exact
focusing as well as preventing camera shake.
Basic way of shutter release
1 Press the shutter release button
halfway.
Lightly press the shutter release button until
you feel the click on your finger.
2 Confirm the focus frame on the
display turns green.
Hold the shutter release button and wait
until the focus frame turns green. The
camera is in focus.
3 Press the shutter release button
fully.
Press it down slowly until the shutter is
released.
Pressing the shutter release button
You can press the shutter release button all the way down (single
step) when Focus Mode is set to Standard (Autofocus) and One
push PF in the [A Rec.Mode] menu is set to On. (1 p.114)
This allows you to release the shutter at the right moment. The
pictures are taken as deep-focus (pan focus) shots.
Even if you press the shutter button all the way down when using the
flash, you cannot take a picture until the flash is charged.
The camera is in focus.
The picture is taken.