Filter
Top Products
Operating Instructions
73
2.16 Enabling Privacy Mode
Pressing the privacy button turns the camera into privacy mode. You can keep your
privacy in privacy mode. In this case, the camera operation stops, and the image
transfer by timer or sensor (see page 53 or page 60) is also stopped. The indicator
turns red, and viewers see a gray screen. Privacy mode can be controlled from a
mobile phone (see page 25) or a PC.
1. Click [Privacy Mode] on the Setup page.
2. Click [Save] when finished.
• Selecting [Enable] and clicking [Save] turn the camera into privacy mode.
Notes
• To turn the camera into normal operation, press the privacy button on the
front of the camera (see page 7 in the Installation/Troubleshooting) during
privacy mode. Or click [Disable Privacy Mode] after you log in as an
administrator.
• If you log in as an administrator, you can disable privacy mode from your
mobile phone (see page 25).
Setting Description
Privacy Button • Clearing the Enable box disables the privacy button on the
front of the camera.
Privacy Mode • Selecting [Enable] and clicking [Save] turn the camera into
privacy mode.